No Sew Braided Headbands DIY

I have a few diy’s that I’m hoping to share on the blog in time for making Christmas gifts. This is one that is really simple, requires few materials, and can be made without sewing! Of course, you could sew certain parts if you are a sewer and want to, but it’s totally optional.

no sew braided headbands diy

First of all, start with measuring your head where a headband would sit. If you don’t have a measuring tape or you are making them as gifts, you can use my measurements. Since they are stretchy from the elastic, it should fit most adult heads. I will also share my girls head measurements. Just know, Miss E (the 2 year old), has a big head. It’s always in the 98% for head sizes her age. So if making one for a toddler you might want to consider that ;) lol.
Mine was 23.5″. Miss J (my 6 year old) was 20″ and miss E was 18″.

Materials:
-Fabric
-Elastic ponytail holder
-Glue (hot glue or fabric glue will do)
-Measuring tape

1. You want to cut at least 3 strips that are double the length of your head measurement and about 1″ wide. You can make the width larger or smaller depending on what you want. I made the ones on mine a little bigger so it would be thicker. If you don’t have super long pieces of fabric, you can tie them together (or sew them together).
2. Place all three strips together and loop through an elastic. Leave enough to knot the fabric two times. There will be some extra fabric on the end, but we will take care of that later.
3. Start to braid as close as possible to the knot. Make it loose or tight, however you like. I prefered mine on the tighter side. Don’t worry if you tied any pieces together and they are sticking out at this point. Some might get braided in though.
4. Braid until the braid and the length of the elastic ponytail holder is equal to the head measurement you took earlier. My elastics weren’t too stretchy, so this worked perfectly. If yours has a lot of stretch, test it on your head and see if you want the braid shorter.
5. There will be enough fabric on the end to loop through the elastic and knot two times on that end. Trim any pieces sticking out.
6. Use glue to help secure knots in place. Make sure it is dry before putting on head.
*Instead of knotting fabric on, you can simple fold the fabrics over the elastics and sew them there.

no sew braided headbands diy

This would be a perfect gift to make in bulk for all your girl friends or little girls in your life. Have fun making some :)
-Jess

Comments

    • Happy Together says

      Why thank you :) The bow is actually one of the girls hair clips lol. I snapped in on so I wouldn’t lose it and then kept it on because I thought it looked cute :) It’s from Target.

    • Happy Together says

      Thank you for letting me know! It was showing up in firefox but not other browsers, so I just uploaded the pic myself instead of using flickr :) You should be able to see it now.

Trackbacks

Leave a Reply

Your email address will not be published. Required fields are marked *