Corbel Wall Lamp DIY

Corbel Wall Lamp DIY | happy together
I love when a project turns out even better than what I was hoping for! That is what happened with this corbel wall lamp diy. Miss E’s room has been mostly done for a while, but she’s needed some type of lighting for reading at night. I was on instagram and saw these wall lamps in someone’s foyer, and I instantly remembered these bookends I had bought at Magnolia last year. I just bought them because I thought they were pretty but then didn’t know where to put them. Lo and behold, they were the perfect thing to make these with! And good news! No electrical knowledge needed ;)

Corbel Wall Light DIY | happy together Corbel Wall Light DIY | happy together Corbel Wall Light DIY | happy together
To make your own you will need:

  • Corbel (I used these corbel bookends)
  • Lampshade that is size appropriate for corbel (I used these lampshades)
  • Mason Jar Lamp Adapter (small mouth/wide mouth…. use the size that would look best on the corbel you use. I used the small mouth ones)
  • Strong Adhesive (I used E6000)
  • Optional: Spray paint and cord cover (you can easily make a diy cord cover like I did too)
  • Hanging hardware of your choice
  • Tools: staple gun and tools necessary to attach hanging hardware you chose

Corbel Wall Light DIY | happy together
First do any preparation to the corbel that is needed. If you are using antique ones, you might need to clean it up, repaint, etc. Since these were technically bookends, I had to scrape off the black things, sand it down, and change where the hanging hardware went.

Corbel Wall Light DIY | happy together Corbel Wall Light DIY | happy together Corbel Wall Light DIY | happy together
This next step is optional, but I wanted to spray paint the top of the lamp adapter a bronze color (I used this). To make sure the cord didn’t get any paint on it, I covered it with a plastic bag and taped it in place. I also taped over the on/off switch and put a paper towel in the top to protect the light bulb socket.

Corbel Wall Light DIY | happy together
Once the paint dries, glue on the lamp adapter. Make sure to try it in place with the lampshade first though. You want to make sure that the lampshade won’t hit the wall when it’s in on. When the glue has dried, you can use a staple gun and secure the cord down in a few places. If you would like to add a cord cover you can find them already made or you can make your own. I just used burlap ribbon with metal in the edges. I hand sewed it together over the cord and then scrunched it up. The metal edging keeps it in place so it keeps that scrunched up look.

Corbel Wall Light DIY | happy together
I am so impressed with the finished product and it didn’t take long at all. Let me know if you make one. I would love to see one of these made with different types of corbels. Share on social media using #happytogetherbyjess Happy creating! -jess

Corbel Wall Lamp DIY | happy together 12

Want to share this post? Pin on PinterestTweet about this on TwitterGoogle+Share on FacebookEmail to someone


  1. Valerie says

    Hi there, Jessica! I happened to stumble across your blog and love it! I am inspired to recreate the look of your daybed. Where did you find the shams and bedskirt???

    • Jessica says

      Hi :) Well the back pillow shams are from Target and all of the black/white pillows are from Ikea. The bedskirt is actually one I made from a drop cloth. You can find tutorials on Pinterest to make one if needed :)

Leave a Reply

Your email address will not be published. Required fields are marked *