This diy dining table has been one of my biggest projects to accomplish for our new home. It took me a really long time to research and determine which plans to follow and what color to stain it, but I finally just went for it and am glad I did. I was a little intimidated to be honest. I had never used a kreg jig before, but decided it was time for me to learn it and now I use it all the time. When researching what I wanted to make, I knew I wanted it to be long enough to fit eight chairs. I had painted the six chairs from our older table and then had bought two clear chairs from Hobby Lobby that I cover with a fur like rug (lovingly referred to as the viking chairs by some of our friends). I also wanted it to be so the chairs didn’t hit the table legs in some odd way. When I finally came upon this rustic farmhouse table plan I knew it would work for what I wanted and didn’t look too complicated for a novice builder like me.
It really didn’t take that long to put together, but I did make a few changes. I added an extra 2×4 piece to each of the end parts to make it taller. I just felt there wasn’t enough leg room without it. I also decided to just use 1″x10″x8′ wood for the top instead of the 2″x6″x8′ for a few reasons. The table was already getting really heavy so this made the table lighter and I didn’t have to put as many boards on the top since the ones I used were wider. I also decided not to add the two end pieces on the table top to save me some time. I just put all the boards together and once I attached them to the frame, I ran the saw down the edges to make them perfectly straight and even (thanks to my friend Ashley for that tip ;), then finished them off with a little thin piece of wood for a polished look. I would highly recommend this plan because it’s on the easier side and you can easily customize it. There is just one more tip. In step 2 when assembling the ends, I would use more screws when attaching the leg posts. Just trust me on that one lol, it’s something I wish I had done after accidentally having the table fall when attaching the second side end to the table rails. Either that or make sure to have someone help you during that part.
Now for the stain, I saw this post and fell in love with the look! Half Minwax Provincial mixed with half Minwax Weathered Oak. Mine didn’t turn out quite the same, but that’s because I was using different wood. I think if I had done a different mix ratio, it might have looked more like theirs but oh well. I’m happy with it and love my new diy dining table that can now fit even more guests. -jess